TotalPOS

Components

Description

System Board

• CPU: 
  • TotalPOS-01:  VIA nanoBGA2 Eden800, V4 bus 400 MHz @ 800MHz
  • TotalPOS-07:  VIA C7-M 1.5GHz, 400MHz @ 1.5GHz
• Chipset:
  • CN700, VT8237R+, VT1636
• On board Memory:
  • 256MB (512Mb*4)
• Memory slot
  • SODIMM DDR 333/400, up to 1 GB
• 6 Serial Interface (UART) for I/O devices
  • 1 for thermal printer
    • 34-pin
  • 1 for 2D Scanner (optional)
    • 1x 12 pin ZIF, 0.5 mm spacing connector on MB
    • RS232 TTL and SPI (optional)
  • 1 for MSR/ Combo
    • MSR (optional)
    • Combo MSR
  • 1 COM port on rear (RS232/RS422/RS485 by jumper setting)
  • 1 for HW modem (Optional)
    • RS232 modem
  • 1 reserved
• 1 Parallel (For Thermal Printer)
• Connector signals combined in 32 pins (Parallel and Serial)Parallel and Serial auto setting by software
• 2 SATA ports & 1 IDE connector & 1 CF slot
• 6 USB ports (USB 2.0) for I/O devices
  • Smart Card
  • Finger Scanner (optional)
  • Card Bus control IC
  • Touch panel via 7-W control IC
  • 2 for rear I/O
• 1 i1394 port (IEEE1394a) for extending one 4-pin socket
  • Reserve pin headers
• 2 RJ11 ports
• 1 for Modem
• 1 for Cash drawer  (optional)
• 10/100BaseT Ethernet (Standard)
• Mini-PCI for IEEE802.11 b+g Ethernet
• PCMCIA for IEEE802.11 b+g Ethernet, GPRS or HSDPA (optional)
• 1 PS2 KB/ 1 PS2 Mouse
• 1 DC jack (19 V)
• AC97 2.2 compliant audio (Line-out, Mic-in)
• (MDC via 12-pin)
• Video: LVDS (VT1636 or VT8251) for LCD panel, 1 VGA port on rear
• SMART Battery control: LTC4100
• AMI BIOS

Sub-cards

• Battery board
• Connector board
  • 1 parallel (thermal printer),
  • 2 serial (thermal printer, MSR-only/MSR-combo)
  • Touch-panel signals
  • Power LED & Battery LED signals
  • 1 Inverter connector
  • 2D scanner trigger button (optional)
• LED board
  • Power LED: "Power on" shows Red
  • Battery LED:
    • "Full battery" shows Green;
    • "Charging Battery" shows flashing Red;
    • "Only battery power; no AC adapter" shows Red.
• Inverter board
  • CCFL power consumption (PCFL) 6.4W Typically
  • PWM back-light control
• i1394 board
  • 1 4-pin socket

Storage Device

• 2.5" SATA HDD: 120GB 5400rpm (Default)
• CF Card (Optional)
• 2.5" PATA Hard Disk Drive (Optional)

LCD Display

Technology

TFT

Active screen size

12.1 inches(30.73cm) diagonal

Outline Dimension

261(H) x 199(V) x 5.1(D) mm(Typ.)

Pixel format

1024 horiz. By 768 vert. Pixels RGB stripes arrangement

Luminance, white

143 cd/m2 (Typ.), Average 5point @5.5 mA

Touch panel

• Size: 12.1"
• 7 wire, Resistive type
• Life: 10,000,000 times

MSR

• Interface: UART
• 3 tracks
• Read
• Life: 300,000 Passes
• Magnetic stripe card reader or combo device for barcode and Magnetic stripe card reader.

Smart Card Reader

• Connecting interface: USB
• Card acceptor: User card: Friction type, 200,000 cycles
• IC card: 1 user card

2D Scanner (optional)

• Interface: UART
• Scan angles: 360 (Horizontal), 270 (Vertical)
• Resolution: VGA 640x480(307x200) pixels, Monochrome 256 levels of gray
• Sensor area 3.84mmx2.88mm (0.151"x0.113")

Finger Scanner (optional)

• Interface: USB
• Sensor: CMOS reader
• Resolution: 500 dpi with distortion<1%
• Capture area: 13mmx16mm (256x320 pixels)

Thermal Printer

• Method: Thermal line dot printing
• Number of dots/line: 832
• Resolution (dots/mm): 8
• Paper width (mm): 112 (+0 ~ -1)
• Printing width (mm): 104
• Speed (mm/sec max): 85
• Paper path: Straight
• Interface: Parallel or URAT

Adaptor

• 135W AC input DC power supply
• 19 V input, 7.1A

MDC

V.92/V.90/V.34 data

FAX rates up to 33.6kbits/s

Wireless LAN      

LAN 802.11b+g

Antenna: 2.4G

Battery

E013RJ type Lithium Ion rechargeable battery packs with SMBus 1.1 interface

Cell (R2400mAh), pack 7200mAh.

Subsystem

Components

Remark

Core chipset

• TotalPOS-01: VIA Eden processor, 800MHz, V4 bus @ 400 MHz
• TotalPOS-07: C7-M processor 1.5GHz, V4bus @ 400MHz

North Bridge Controller

VIA CN700

TFT LCD (VT1636 or VT8251 LVDS Interface), 266/333/400 DDR Memory Support

South Bridge Controller

VIA VT8237R+

USB 2.0 x 8, mini-PCI Bus, SATA /IDE/CF, Power Management, RTC

W83627

Keyboard, Mouse, COM1, COM2, Parallel,

F81216DG

COM3~6; F81216 supports a serial IRQ scheme.

Because more than one device may need to share

the signal serial IRQ signal line, an open drain signal scheme is used.

ICS 9P936AF

Clock Synthesizer

ICS 952906FT

Clock Buffer

FMEM SST49LF004B-33-4C-NH PLCC32

Firmware Hub

LTC4100

SMART Battery control

W78L058A24PL

Power sequence, LED status

LAN

VIA VT6103 SSOP48

10/100Mbps Ethernet

Audio

VT1613

AC97 Codec (Line-Out, Mic) (MDC)

LVDS

VT1636 or VT8251

LCD panel

Memory

256MB on board

(256MB module option)

Power

ISL6532CR (PWM)

DC-DC Converter

Touch screen controller

T010-7WIC-TUSB

Fujitsu 12.1 resistive 7-wire

Cardbus

R5C843, R5531V

Ricoh PCMCIA, i1394a